Table of Contents
Advertisement
Getting Started
Operation Lock
VR-N1600U/VR-N1600E/VR-N900U is equipped with an operation
lock feature to prevent the system from being turned off accidentally
as well as unauthorized recording operations.
Setting Operation Lock
1
Press and hold the [FUNCTION] button, and press the
[KEY] button at the same time
● Operation is locked. The [LOCK] indicator lights up when
in the operation lock mode.
Canceling Operation Lock
1
(When in the operation lock mode) Press the
[KEY] button while holding down the
[FUNCTION] button
● Operation lock is canceled.
● The light of the [LOCK] indicator goes off.
[LOCK] Indicator
WARNING
LIVE/BROWSE
OPERATE
ALARM
SELECT
HDD
LOCK
REC CONTROL
PTZ/PRESET
FUNCTION
SERIAL
CANCEL
ZOOM OUT
ZOOM IN
ENTER
[FUNCTION]
button
[LOCK] Indicator
[FUNCTION]
button
22
VR-N1600U/E
REV
SEARCH
KEY
ALARM CLEAR
REC/STOP
STOP(PB)
PLAY
[KEY] Button
VR-N900U
[KEY] Button
During Initial Startup
Perform language setting and automatic camera registration when
starting up this unit for the first time.
Before Starting Up.
● The DHCP setting is required for the IP camera beforehand.
Start up this unit first, then switch the camera on after
confirming that the [Auto Detect Setting] window is displayed.
● Refer to the user manual supplied with the camera for
instructions on how to specify the IP camera settings.
● By default, Time zone is set to GMT. Specify a Time zone
according to the region used. Refer to the INSTRUCTIONS on
how to specify a Time zone settings.
Keypad
LIVE/BROWSE
OPERATE
SELECT
REC CONTROL
PTZ/PRESET
SERIAL
CANCEL
[16/ENTER] Button
FWD
Keypad
SKIP
[ZOOM IN/ENTER]
Button
Starting the Unit
1
Turn on the power switch at the rear panel.
● Doing so starts up the unit.
WARNING
ALARM
HDD
LOCK
FUNCTION
SEARCH
KEY
ALARM CLEAR
REC/STOP
ZOOM OUT
ZOOM IN
ENTER
[KEY] Button
[KEY] Button
VR-N1600U/E
REV
FWD
STOP(PB)
PLAY
SKIP
[SKIP] Button
VR-N900U
[SKIP] Button
Advertisement
Table of Contents
