JVC LST0728-001C Instructions Manual page 33

C
Use the [7/B](5/B) button to display the list of cameras
D
Use the [10/0/E](8/E) button to select a camera
E
Use the [SKIP] button to select [Settings...], followed by
pressing the [16/ENTER](ZOOM IN/ENTER) button
● The [Camera Settings] screen appears.
Speedup Settings
Recording
Settings
F
Set the display rate for live images
● Set the display rate for live images to ASame as
recordingB or ASame sa speedupB under [Live
Settings].
● When ASame sa speedupB is selected, the [Frame
Rate] specified under [Speedup Settings] is used as
the display rate for live images.
● When ASame as recordingB is selected, the [Frame
Rate] specified under [Recording Settings] is used as
the display rate for live images.
Memo :
● Use the [SKIP] to move between the setting items.
● Using the [2/D] or [10/0/E](8/E) button to select a parameter.
● To enter numeric characters, press the [SELECT] button to turn
C
12
13
Memo :
● For details on the recording control mode, refer to [Recording
D
● You can specify decimal values using the software keyboard.
[Live] Screen
Live Settings
on the [SELECT] indicator. After entering the numeric
characters, press the [PTZ/PRESET] button to turn on the [PTZ/
PRESET] indicator.
G
Use the [SKIP] button to select [OK], followed by
pressing the [16/ENTER](ZOOM IN/ENTER) button
Repeat Step 10 for each camera
Use the [SKIP] button to select [Close],
followed by pressing the [16/ENTER](ZOOM IN/
ENTER) button
● Setting is complete and the [Live] screen appears.
● The [REC CONTROL] indicator lights up, and recording
starts in the recording control mode. (A Page 52)
Camera Images] (A Page 52).
25