Table of Contents
Advertisement
Basic Operation
Screen Setup (continued)
Adjusting Camera Settings (continued)
Item
G
Sound on
Enables notification with a simple alert sound
when events related to the selected camera
Event
occur while viewing images from the camera
on the [Live] screen.
To use this feature, you need to configure the
event notification setting. (A Page 102)
Always off
Does not output sound alert when an event
related to the camera occurs.
Always on
Outputs a sound alert each time an event
related to the camera occurs.
H
Apply To
Press this button to apply the new settings to
all cameras.
All
Note :
● Set this unit such that the total distribution frame rate to all
surveillance computers does not exceed 80 ips (VR-N1600U/E),
160 ips (VR-N1600U/E(A)), or 30 ips (VR-N900U).
● The recording frame rate may deteriorate if you change the
picture quality. Changing the [Image Quality] settings may affect
the recording performance. As such, use this function with the
value fixed at AFullB.
● When you drag the timeline browser using the mouse during
playback, the frame rate setting is disabled. [Searching
Recorded Image Using the Timeline Browser] (A Page 44)
● Notification sound is not output from this unit during motion
detection or occurrence of an event. This function is for use by
the NVR Viewer, which is downloaded onto the surveillance
computer.
4
To adjust the settings on other cameras, repeat
Steps 2 to 3
Memo :
● To adjust the settings of all cameras at once, click the [Apply To
All] button. The new camera settings will be applied to all
cameras in the view.
64
Description
Using Your Views on Different Computers
User settings, including the [Private] view, are stored on this unit. In
other words, you can use your [Private] views on any surveillance
computer that has this unit and the ANVR ViewerB installed
(A Page 123) by logging in with your own user name and
password.
1
Double-click the [Setup] tab on the NVR Viewer.
Note :
● User rights may be configured to restrict access to the [Setup]
tab. In this case, consult your system administrator.
2
Select the folder you want to use in the [Views]
section
● You can create or edit views.
● Folders that cannot be edited are indicated by the [LOCK]
icons.
Adding a Carousel
You can use the carousel feature to display images from multiple
cameras in sequence in a single view position. Also, you can set the
time interval for switching the camera to view.
1
Displaying the [Screen Setup] Screen
[Carousel]
Advertisement
Table of Contents
