Day/Night High-definition Dome Camera· User Manual
3.1.10 Day/Night Setting
Move the cursor to DAY/NIGHT, and select AUTO, COLOR, or
B/W by setting the menu button to left/right.
COLOR mode is used for normal lighting conditions.
B/W mode can increase the sensitivity in low light conditions.
AUTO Mode Setting
In AUTO mode, the day mode and the night mode can sw itch
automatically.
Steps:
1. After moving the cursor to DAY/NIGHT, set the menu button
left/right to select AUTO.
2. Press confirm to enter the submenu.
BURST
DELAYCNT
DAYNIGHT
NIGHTDAY
Select ON or OFF to enable or disable
this feature.
The value ranges from 0 to 255. This
value is the delay time before the
day/night mode switches.
The value ranges from 0 to 255. The day
mode switches to the night mode when
the light condition reaches to the value
you select.
The value ranges from 0 to 255. The
night mode switches to the day mode
when the light condition reaches to the
42