HIKVISION DS-2CC5181P-VF User Manual page 58

Day/Night High-definition Dome Camera· User Manual
The × 2, × 4 options accumulate the light by frame unit to lengthen
the exposure time.
3. Move the cursor to MOTION, and press confirm to select the
value: SLOWER, SLOW, STD, FAST, FASTER.
AGC
There are 4 modes selectable for auto gain control: OFF, HIGH,
MID or LOW.
FLICKERLESS
This function can avoid the image flicker. Move the cursor to
FLICKERLESS, and press confirm to set it ON or OFF. This function
is used for PAL standard camera under 60Hz light source, and
NTSC standard camera under 50Hz.
Digital WDR Setting
Note:
DS-2CC5187/5197/51A7P (N)-VF doesn't support Digital WDR
function.
：
Steps
1. Move the cursor to Digital WDR, and press confirm to enable
or disable this function. If the Digital WDR is enabled, the
parameters below can be configured:
57