HIKVISION DS-2CC5181P-VF User Manual page 57

Day/Night High-definition Dome Camera· User Manual
1). When the IR Switch is on, t he camera goes to the
protection mode if the Day mode switches to Night mode 5
times continuously in 10 minutes. The protection mode
will last for one hour. One hour later, the camera will detect
the surrounding's light, and switch to the day mode if the
brightness reaches to the N→D LEVEL value.
2). AUTO mode means the camera switches between Day and
Night modes automatically. And when the light condition
reaches to the D→N (N→D) LEVEL you have set, the day
and night mode will sw itch automatically. And D→N (N→D)
Delay means the time from the day (night) mode to night
(day) mode when the light condition is up to the sw itching
threshold.
SHUTTER
Steps:
1. Move the cursor to SHUTTER, and press confirm to select the
values. OFF, 1/120, 1/175, 1/250, 1/500, 1/750, 1/1K, 1/2K,
1/4K, 1/10K, 1/100K are selectable.
Note:
The SHUTTER mode is AUTO and not adjustable when the LENS
mode is ELC or the WDR is enabled.
2. Move the cursor to SLOW SHUTTER, and press confirm to
select the value: OFF, × 2, ×4, ×6, ×8, ×12, ×16, ×24, ×32,
× 48, ×64, ×128, × 160, × 256, ×512.
Note:
56