HIKVISION DS-2CC5181P-VF User Manual page 26

Day/Night High-definition Dome Camera· User Manual
12. Route the cables through the hole in the center of the in-ceiling
mount.
13. Secure the camera with two screws as shown in Figure 2-10.
14. Connect the video output connector to the monitor. Connect
the power connector to the power supply.
15. Three-axis adjustment.
1). View the camera image using the monitor.
2). Rotate the panning table to adjust the panning position of
the camera. The adjusting range is from 0 degree to 355
degrees.
3). Loosen the tilting lock screw.
4). Rotate the tilting table to adjust the tilting position of the
camera. The adjusting range is from 0 degree to 180
degrees.
5). Tighten the tilting lock screw.
Figure 2-10 Securing the Camera
25