HIKVISION DS-2CC5181P-VF User Manual page 70

Day/Night High-definition Dome Camera· User Manual
4). Press confirm to exit the CAM ID position setting interface,
and return to the CAM ID menu.
7. Move the cursor to RETURN and press confirm to return to the
previous menu.
SYSTEM INFO
Move the cursor to SYSTEM INFO and press confirm to check the
hardware, software and DSP version information. The system
information is used for device maintenance or repair.
CAMERA RESET
Move the cursor to CAMERA RESET, and press confirm to reset
the camera parameters to the factory default settings.
SYSTEM INFO
HARDWARE REV1.00
SOFTWARE
DSP
RETURN
Figure 3-28 System Information
REV1.00.00
REV1.00.00
69