HIKVISION DS-2CC5181P-VF User Manual page 40

Day/Night High-definition Dome Camera· User Manual
2. Position the cursor on DETECT SENSE, and set the menu
button left/right to adjust the sensitivity level.
3. Position the cursor on BLOCK DISP, and set the menu button
left/right to select ENABLE.
4. Press the menu button to enter the setup interface of the
detection panes.
5. Select ON to enable BLOCK DISP.
6. Move the cursor to MONITOR AREA and select ON.
7. Return to the MAIN MENU and click SAVE ALL.
8. You can find the BLOCK DISP take effect after you exit the
main menu.
MONITOR AREA
Steps:
1. Move the cursor to MOTION DET, select ON and press the
menu button to enter the submenu.
2. Position the cursor on DETECT SENSE, and set the menu
button left/right to adjust the sensitivity level.
3. Position the cursor on MONITOR AREA. Select OFF to disable
area motion detection. Select ON to enable area motion
detection.
4. Position the cursor on AREA SEL to select one area. There are
four areas available.
39