Renault FLUENCE Handbook page 38

CHILD SAFETY: choosing a child and baby seat mounting
2
The two rings 1 are located between
the seatback and the seat base of the
seat and are identified by a marking.
To ensure your child seat can be easily
fitted and locked on rings 1, use access
guides 2 on the child seat.
1.32
1
The third ring is used to attach the
upper strap on some child seats.
Pass the belt between the seatback
and the rear parcel shelf (to release
the bench seat: refer to Section 3 "Rear
bench seat"). Attach the hook to one
of the rings 3 in the luggage compart-
ment.
Pull the belt so that the back of the child
seat comes into contact with the vehicle
seatback.
(2/2)
3
The ISOFIX anchorage
points have been exclu-
sively designed for child
seats with the ISOFIX
system. Never fit a different type of
child seat, seat belt or other objects
to these anchorage points.
Check that nothing is obstructing
the anchorage points.
If your vehicle has been involved in
a road accident, have the ISOFIX
anchorage points checked and re-
place your child seat.