Renault FLUENCE Handbook page 123

REVERSING CAMERA
2
Activating, deactivating the
reversing camera
From the multimedia display 2, select
"menu", "Settings", "Park Assist" then
"Rear camera view settings". Activate
or deactivate the reversing camera
and confirm your choice by selecting
"Done".
(2/2)
Park Assist
Rear parking sensor
Volume
Rear camera view settings
Image settings
You can also adjust the camera image
settings (brightness, contrast, etc.)
This function is an additional aid. It cannot, therefore, under any circum-
stances replace the vigilance or the responsibility of the driver.
The driver should always pay attention to sudden incidents during driv-
ing: always ensure that there are no moving obstacles (such as a child,
animal, pram, bicycle, etc.) or small, narrow objects such as stones or posts in
your path when manoeuvring.
Done
The screen shows a reverse image.
The frames are a representation
projected onto flat ground; this in-
formation must not be taken into
account when superimposed on a
vertical object or an object on the
ground.
Objects which appear on the edge
of the screen may be deformed.
In very bright light (snow, vehicle in
sunshine etc.), the camera vision
may be adversely affected.
If the boot is open or poorly closed,
the message "Boot open" appears
and the camera display disappears.
2.33