Vehicle Settings Customisation Menu - Renault FLUENCE Handbook

VEHICLE SETTINGS CUSTOMISATION MENU

1
On equipped vehicles, this function,
which is integrated in the trip compu-
ter and warning system 1, allows you
to activate/deactivate some of the vehi-
cle's functions.
Accessing the settings
customisation menu
With the vehicle stationary, press
either button 2 or 3 until the mes-
sage "Settings menu: press and hold"
appears on display 1. Press either
button 2 or 3 for longer than 2 seconds
to enter the menu.
Adjusting the settings
Press one of buttons 2 or 3 to select a
function to change:
a) Auto door locking while driving;
b) Auto rear wipe with reverse gear;
c) Auto dipped-beam headlights;
d) Rear parking sensor ;
e) Parking sensor volume;
f) LANGUAGE.
=
function activated
<
function deactivated
Once a line has been selected, keep
pressing either button 2 or 3 to change
2
the function: If you select either "Parking
sensor volume" or "LANGUAGE", you
will be given a new choice of options
(parking distance control volume or in-
strument panel language). In this case,
3
make your selection and confirm it by
2
holding either button 2 or 3, the value
selected is shown by a
of the line.
To exit the menu, select "EXIT" or
"BACK" then confirm by holding either
3
button 2 or 3. It may be necessary to
carry out this operation several times.
The vehicle settings customisation
menu cannot be used when driv-
ing. At speeds of above 12 mph (20
km/h) for vehicles with a manual
gearbox (0 mph for vehicles with an
automatic gearbox), the on-board
display returns automatically to the
trip computer and warning system
mode.
~
in front
1.69