Installation - JabloCom EYE-02 Manual

2.2 Installation

For an extended graphic version of the installation procedure, see the Quick Guide manual.
Before inserting SIM card into camera make sure that:
- PIN protection is disabled
- MMS service is enabled
- Internet data access is enabled
• Insert SIM card and battery into camera
Unscrew and open the battery cover.
• Install the camera to the selected position
Mark and drill-out fixing holes on a wall.
Mount the camera holder firmly.
• Connect camera to power source
Plug the power cable to the camera.
• Enroll your mobile phone and remote control to the camera
Call the camera number from
your mobile phone.
JR_EYE-02.ENG.MAN.Manual.16.A
Insert the SIM card.
Adjust the camera position.
Plug the power adaptor to a wall socket. The camera will automatically turn on. Wait 30 seconds
and check the EYE-02 camera LED lights on the front panel.
On the remote control, press the button
- 3 -
Insert battery and screw cover back.
Remove the lens protection.
.