Intended use Remove adjusting keys and wrenches Your Black & Decker angle grinder has been designed for cutting Always check that adjusting keys and wrenches are removed metal and masonry using the appropriate type of cutting or from the tool before operating the tool.
Electrical safety If this condition occurs, check the machine to determine This tool is double insulated; therefore no earth wire the cause. is required. Always check that the power supply Ensure that blotters are used when they are provided with corresponds to the voltage on the rating plate.
Fitting the side handle Removing Screw the side handle (2) into one of the mounting holes Keep the spindle lock (3) depressed and loosen the outer in the tool. flange (13) using the two-pin spanner (14) (fig. E). Remove the outer flange (13), the sanding disc (16) and Warning! Always use the side handle.
Protecting the environment EC declaration of conformity AST6/CD105/CD110/CD115 Separate collection. This product must not be Black & Decker declares that these products conform to: disposed of with normal household waste. 98/37/EC, 89/336/EEC, EN 50144, EN 55014, EN 61000 (sound pressure) 89.9 dB(A), L (acoustic power) Should you find one day that your Black &...
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose, Auckland, New Zealand United Kingdom Black &...