Declaration Of Conformity - Avaya G11 Instructions Manual

IMPORTANT SAFETY INSTRUCTIONS (SAVE THESE INSTRUCTIONS)
The most careful attention has been devoted to quality standards in the manufacture of your new device. Safety is a major factor in
the design of every set. But, safety is your responsibility too. Please read carefully the helpful tips listed below.
Use
When using your device, the following safety precautions should always be followed to reduce the risk of fire, electric shock, and
injury to persons.
Follow all warnings and instructions marked on the telephone.
This device can be hazardous if immersed in water. Do not use this product near water, for example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet basement or near a swimming pool. To avoid the possibility of electric shock, do not use it while
you are wet. If you accidentally drop the device into water, do not retrieve it until you have first unplugged the modular line cord and
disconnected the power supply. Then, call Avaya service personnel to ask about a replacement.
Avoid using the device during electrical storms in your immediate area. There is a risk of electric shock from lightning. Urgent calls
should be brief. Even though protective measures may have been installed to limit electrical surges from entering your business,
absolute protection from lightning is impossible.
If you suspect a natural gas leak near the device, report it immediately, but use a telephone away from the area in question. The
device's electrical contacts could generate a tiny spark. While unlikely, it is possible that this spark could ignite heavy
concentrations of gas.
Never push objects of any kind into the equipment through housing slots since they may touch hazardous voltage points or short
out parts that could result in a risk of electric shock. Never spill liquid of any kind on the device. If liquid is spilled, however, refer
servicing to proper service personnel.
To reduce the risk of electric shock, do not disassemble this device. There are no user serviceable parts. Opening or removing
covers may expose you to hazardous voltages. Incorrect reassembly can cause electric shock when the device is subsequently
used.
Service
Before cleaning, unplug the device from the Ethernet LAN and the power supply. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Be sure to refer servicing to qualified service personnel when any of these conditions exist:
If liquid has been spilled onto the device.
•
If the device has been exposed to rain or water.
•
If the device has been dropped or the housing has been damaged.
•
If you note a distinct change in the performance of the device.
•
CE mark
The "CE" mark affixed to this equipment means that the unit complies with directives located at http://www.avaya.com/support.

Declaration of Conformity

Contact your local sales representative or download the Declaration of Conformity (DoC) for this equipment by going to
http://support.avaya.com.
EN
2