Error Message
HDD Full !
Wrong Password
2 FAQ & Maintenance Guide
A. Steps to replace drives.
1 Turn off the power.
※ Note:
For you safety, please turn off the power before replacing the DVD drives or
doing any inspection.
2 Remove both of the side cover of the duplicator box. In order to do so, you will
need to remove 2 screws on the back of the case.
3 Gently using your hand, pull off the 2 attached cables from the drive. There is
also 2 screws attached to each side of the case that need to be removed.
Possible Reasons
HDD has no enough
space.
Insert wrong password.
Recycle
Components
Troubleshooting
Please release HDD space.
Please double check again your
password.
Life
Cause
Short !!
Appendix
39
Need help?
Do you have a question about the BD18xxL Controller and is the answer not in the manual?