Table of Contents
Advertisement
Chapter 4. Operation
1. Copy
It is important to make sure that your source disc is placed in the right drive.
You can check or select your source reader by 6.Select Source. (Plase refer to
6.Select Source)
1. Select 1.Copy and place source disc and blank discs into the
proper trays. Then the system will detect the source disc and show the
information.
2. Press
to start copy
Speed of burning
3. Once the copy task is finished, the copied discs will be ejected and the
result of copy task will show on the LCD:
※ Note:
Due to default setting of auto start time, the duplicator will start to
copy automatically within a few seconds. You can set "OFF" to close
the auto start function or set a longer waiting time. The default setting
is 5 seconds. (About this setting please refer to 8-1.Auto Start Time.)
If HDD is selected to be the source reader, you have to upload the source to
the built-in HDD and then follow copy process to do your copy task. How to
upload data from disc to HDD please refer to 9-2.Disc to Image.
※ Note:
The default setting of source reader is the first drive.
16
Q'ty of target
Copy process %
Q'ty of target disc
Data size
Data size
Copied data size
Elapsed time
Hide quick links:
Advertisement
Table of Contents
