Chapter 4. Operation
6. Once the erase task has finished, the O stop blinking, the disc will be
ejected automatically.
※ Note:
1 If you see F and f are blinking by turns, which means the whole new
2 Erase function only support rewritable discs.
7-3. PreScan Source
This function will scan and detect any bad sectors existing in the source
disc,which helps you to ensure the readability of source disc.
1. Place a source disc into reader.
2. Use
/
select 3.Prescan Source and press
3. When prescan task is in process, you can see the process on the display:
Elapsed time
4. When the prescan task has finished, the result of prescan will be shown on
the LCD.
22
DVD+RW is in format process.
to select 7.Utility and press
to enter the sub menu.Then,
to start scan task.
Scan process %
Data size
Scanned data size