Format Hdd; Load & Copy - BestDuplicator BD18xxL Controller User Manual

Chapter 4. Operation

9-8. Format HDD

This function allows you to format the built-in HDD while the HDD is NOT
selected as reading source. You can change the source from HDD to other
drive in 6.Select Source.
Due to the capacity for discs loading is hard to predict precisely and more and
more different discs coming out. The traditional method of format is not ideal
for using on this duplicator. This duplicator is able to detect disc capacity and
assign a proper partition for the disc's data automatically. You do not have to
predict and select CD or DVD partition in the beginning and you can check
how many discs you can upload from 9-7.Show HDD Info. This intelligent HDD
management technology is much easier for HDD management than the old
way.
9-9. Load & Copy
This function is for the system to load the source to HDD and make copy
synchronously. The system will load the source to HDD during the first round
of duplication, and the HDD will replace the reader drive to be the source in
second round of duplication. This special function is very convenient for a big
copy task. You also can set:
• Synchronous: The system will load the source to HDD and make copy at the
same time.
• Load First: The system will load source to HDD first and take HDD as source
to copy.
• OFF: To disable Load & Copy function.
※ Note:
1 The image file will only be saved temporary if it is loaded to
2 If you would like to save the file permanently please load the
32
HDD by Load & Copy function.
file to HDD by manual (refer to 9-2.Disc to image.)