Delete Image; Show Hdd Info - BestDuplicator BD18xxL Controller User Manual

2. Press and select which image file you would like to rename by
pressing /
selected file.
You can select characters or number by pressing
to the next space to edit. The maximum is 8 characters without blank space.
When it has done, press

9-6 Delete Image

You can delete image file from the built-in HDD, but the source image file is
unable to delete if the file is selected as source. Therefore, before you delete
an image file, please check if it is selected as a source and change a new one
source by 9.1 Select Image.
※ Note:
If there is an image file is deleted, the file name will be held for
next new image file, the existing file will not to fill the vacancy.
For example, there are 5 image files (A001~A005) in the HDD,
when you delete A003, A004 will not change to be A003, once
a new file has loaded, its default name will be A003.

9-7 Show HDD Info.

You can check the information of the built-in HDD includes how many discs are
stored and the free space is available in the HDD.
, and then press
to confirm the new name.
Chapter 4. Operation
to start edit a new name for the
/ , and press
31