※ Note:
If LightScribe template cannot be executed normally under Window® 7,
please try to click right button on the mouse on the LightScribe icon and
select " Run as administrator" to execute the function.
4 Click the Print to save the lightScrbe image .LSI file to a USB stick or a Disc.
5 Plug the USB drive or Disc into Duplicator.
6 Select the utility function 7-8.PRINT LS Label. The system will read the image
into the duplicator and start printing the LightScribe label.
※ Note:
When doing the LightScribe printing, please turn over the disc. The print side is
face down and data side is face up.
資料面
Appendix
標籤刻印面
37