Quick Guide; Quick Guide For Disc-To-Disc Copy - BestDuplicator BD18xxL Controller User Manual

Chapter 2. Function Table
8. Setup
14
1. Auto Start Time
2. Display Mode
3. Button Beep
1. Eject All Discs
2. Do Not Eject
4. Eject On Start
3. Eject Target Only
4. Eject Source Only
5. Eject All Trays
5. Reader Speed
6. Compare Speed
7. Language
8. Clear Setup
1. Power On Time
2. Startup Menu
3. Skip Reader Error
4. Change Bad Master
5. CD Overburn
6. Show HDD Image
9. Advanced
Name
Setup
7. Keep Buffer
8. Boot Password
9. Setup Password
10.Count Password
11.Eject Tray if no disc
Allow the system to do the Copy, Test, Compare
and Copy & Compare functions automatically
1. Basic
2. Show Speed
3. Show Timer
To enable or disable key sound
To eject all trays with disc inside once the
system is booted up.
No eject any tray or disc once the system is
booted up.
Only eject target trays with disc inside once the
system is booted up.
Only eject source disc once the system is
booted up.
To eject all trays once the system is booted up.
To adjust the reading speed of source drive.
To adjust the speed of drives while comparing.
To set language interface
To reset all the function back to manufacturer's
default setting.
To set a warm-up time from 5 seconds to 99
seconds
To select which function you would like to show
up in the beginning
To set skip the read error and keep copying.
To make the system eject source disc and
ask for another one while the source disc is
unreadable for system.
Set to copy overburn CD.
To show HDD image name or capacity on
Copy, Test, Copy + Compare and Compare
function
To set enable or disable load source to the
buffer.
To enable or disable the user administr ative
password.
To set up the login password
To set password for function "7.6.1 Show
Count".
To set whether users would like to eject trays
if no discs are inserted in when operating the
duplicator.