Button Beep; Eject On Start; Reader Speed - BestDuplicator BD18xxL Controller User Manual

Chapter 4. Operation
• Basic: It will only show the copy process (%) on LCD.
Copy process %
• Show Timer: It will show the time for copy.
Elapsed time
• Show Speed: It will show the speed of burning during copy process.
Speed of burning

8-3. Button Beep

This setting will allow you to set up to hear a beep when a button is pressed or
not.

8-4. Eject On Start

You can make the trays or discs eject once the system is booted up.
•
Eject All Discs: To eject all trays with disc inside once the system is booted
up.
•
Do Not Eject: No eject any tray or disc once the system is booted up.
• Eject Target Only: Only eject target trays with disc inside once the system is
booted up.
• Eject Source Only: Only eject source disc once the system is booted up.
•
Eject All Trays: To eject all trays once the system is booted up.

8-5. Reader Speed

This setting allows you to adjust the reading speed of source drive. The default
setting of reader speed of CD is 40X; DVD is 24X.
26
Q'ty of target
Data size
Copied size