Stanford Research Systems SIM954 Operation And Service Manual page 39

3.7 Typical Application: a High Voltage Isolated, Low Noise, DC-DC Converter
SIM954 300 MHz Dual Inverting Driver Amplifier
TDS 3034 7 Aug 2008 09:19:04
Figure 3.10: The SIM954 driving the same circuit under identical
load conditions with a sinusoidal voltage. The sharp transients are
almost gone. Please note that the oscilloscope is now set to 1 mV
per division, i.e. the e ective scale is now 40 V per division. The
peak-to-peak amplitude is 87 V
driven di erentially with two SIM954 channels by using an isolating
180 power splitter on their inputs to make a close to ideal sinusoidal
di erential driver.
and the ripple RMS is 17 V
pp
3 – 15
.
rms