Mitsubishi Eclipse Workshop Manual page 34

11-12
ENGINE
-
Engine Assembly
w
s
28. DISCONNECTION OF AIR
CONDITTONER COMPRESS.
OR
Disconnect
air
conditioner compressor connector
anch
remove
it with
hoses
from the
compressor
bracket.
It
NOTE
The removed air conditioner compressor should be
fas-
tened (by using rope, etc.)
in a
position that
will
not
interfere with the rernoval/installation of the engine assem-
blv.
33. DISCONNECNON OF ENGINE MOUNT
BRACKET
Before removing the engine mount bracket installation bolt,
use a chain block or similar arrangement
to
suspend the
engine assembly (to the extent that there is no looseness
of
the
chain).
35. DISCONNECNON
OF ENGINE
ASSEMBLY
After checking that the
cables, hoses. harness
connectors,
C
etc. are all removed, slowly raise the chain block to lift the
engine assembly upward out of the engine
compartmen,.O
SERVICE POINTS
OF INSTALIÄTION
3s.INSTALLANON OF
ENGINE ASSEMBIY
When mounting the
engine, check
to
be
sure
that
the
cables, hoses, harness connectors.
etc. are all in
the
correct position.
EITTDAO
e
o
e
o
PW1,E3010