First steps
Third step: connecting the base
¤ First, connect the tel-
ephone jack
insert the cables into
the cable ducts.
¤ Then connect the
power adapter 1.
u The power adapter must always be connected, as the phone
will not operate without a mains connection.
u Use only the power adapter and phone cord supplied. Pin con-
nections on telephone cables can vary (pin connections
¢ page 73).
u The answering machine is ready for use approx. 15 seconds
after the base has been connected or reset (Gigaset E500A
only).
16
and
2
Warning
Gigaset E500
1
Gigaset E500A
1
2
2