Authorisation - Gigaset E500 User Manual

Customer Service & Assistance
The number of the caller is not dis-
played despite CLIP being set.
Calling Line Identification is not ena-
bled.
¤ The caller should ask the network
provider to enable Calling Line
Identification (CLI).
Refer to the notes on calling line dis-
play ¢ page 34.
You hear an error tone when key-
ing an input.
Action has failed/invalid input.
¤ Repeat the process.
Watch the display and refer to the
user guide if necessary.
You cannot listen to messages on
the network mailbox.
Your PABX is set for pulse dialling.
¤ Set your PABX to tone dialling.
Gigaset E500A only:
No time is specified for a message
in the call list.
Date/time are not set.
¤ Set the date/time (¢ page 22).
The answering machine
announces "Invalid PIN" during
remote operation.
1. You have entered the wrong sys-
tem PIN.
¤ Enter the system PIN again.
2. The system PIN is still set to 0000.
¤ Set the system PIN to some-
thing other than 0000
(¢ page 63).
68
The answering machine will not
record any messages/cancels the
recording of a personal announce-
ment.
Its memory is full.
¤ Delete old messages.
¤ Play back new messages and
delete.
The answering machine only
records part of a personal
announcement.
The announcement contained a
pause of more than 2 seconds.
¤ Avoid pausing when recording an
announcement.
The emergency function cannot be
set up.
The feature is only available behind
extension systems that do not
require an "R" or a "P" for obtaining
an outside line.

Authorisation

This device is intended for analogue
phone lines in the UK.
Country-specific requirements have
been taken into consideration.
We, Gigaset Communications
GmbH, declare that this device
meets the essential requirements
and other relevant regulations laid
down in Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration
of Conformity is available at this
Internet address:
www.gigaset.com/docs