JVC CU-VD50AA Instructions Manual page 5

Playing Videos Stored on the DVD
A
Connect this burner to the TV
To power
supply outlet
To DC jack
Power lamp
• For details, refer to "Connecting to the TV" (P.12, 13).
B
Remove the USB cable
• The power lamp on the burner changes as follows.
Green Blinking orange
• When the USB cable is removed, the playback navigator appears automatically.
(About 40 seconds.)
• An unfinalised disc
Caution
cannot be played back
properly. Refer to the
instruction manual of the
Everio camera and
finalise the disc.
C
Use the selection keys on the remote control to select the video to
play back and press the ENTER button.
• When the power lamp blinks slowly in red due to a drop in the burner's interior
temperature, some functions will not work and there will be no image displayed on
the TV screen. Wait until the power lamp stops blinking in red before operating this
burner.
Connect to the TV with
an Audio/Video cable.
Red Yellow
White
Remove the USB cable
Orange
(Playback navigator screen on the TV)
Playback begins!
Red
White
Yellow
01.06.2008 09:51 01.06.2008 11:45
01.08.2008 13:42 01.08.2008 15:15
DIGEST PLAYBACK
TV
1/2
01.06.2008 17:09
01.08.2008 17:32
5