JVC CU-VD50AA Instructions Manual page 32

• HDMI-CEC (Consumer Electronics Control) is an industry standard that
Note
enables interoperability between HDMI-CEC compliant devices that are
connected via HDMI cables.
• Not all HDMI-compatible devices comply with the HDMI-CEC standard.
The HDMI control function of this burner will not work when connected
to these devices.
• This burner is not guaranteed to operate with all HDMI-CEC-enabled
devices.
• Depending on the specifications of each HDMI-CEC-enabled device,
some functions may not work with this burner. (For details, refer to the
instruction manual of your TV.)
• Unintended operations may occur with some connected devices. In
these cases, set "CONTROL WITH HDMI" to "OFF".
• HDMI control does not function when the USB cable is connected.
Caution
Remove the USB cable if you want to use the HDMI control function.
• HDMI control does not function immediately after inserting the power
cord to the AC outlet. Press the power button on this burner to turn it on.
• If the HDMI cable connection is changed, perform the following
operations to allow this burner and the connected devices to recognise
each other.
A With the TV turned on, turn off and on this burner again.
B Set the "CONTROL WITH HDMI" under "CONNECTION SETTING" in
the settings menu to "OFF", then set to "ON" again.
32