JVC CU-VD50AA Instructions Manual page 30

VIDEO SETTING
PICTURE QUALITY
For specifying the video image quality.
NORMAL
CINEMA
FINE
SOFT
USER SETTING
DIGITAL NOISE REDUCTION
For specifying whether to enable noise removal from the image.
OFF
ON
DETAIL SETTING
For specifying the advanced settings when "PICTURE QUALITY" is set to "USER
SETTING".
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
GAMMA
3DNR
PROGRESSIVE OUTPUT
For playing back the source material after converting to an appropriate progressive
video.
AUTO1
AUTO2
VIDEO
• Changing the setting may have no effect on some images.
Note
30
You can only configure settings for video images.
Set to this value under normal circumstances.
Plays back in cinema-like picture quality.
Plays back in clear sharply defined picture quality.
Plays back in soft textured picture quality.
Plays back images in the picture quality specified in
"DETAIL SETTING".
Disable noise removal.
Enable noise removal.
For specifying the image contrast level.
For specifying the image brightness level.
For specifying the image contour.
For specifying the colour intensity of the image.
For specifying the image gray level.
For specifying the image noise reduction.
Automatically detects the film material and video material
and converts to the appropriate progressive video.
In addition to "AUTO1", automatically detects the 30fps
progressive video and converts to the appropriate
progressive video.
Converts the video material to the appropriate progressive
video.