Brother HL-5130 Service Manual page 182

5) Remove the two bind B M4x12 Taptite screws, and then remove the rear cover L.
6) Remove the two bind B M4x12 Taptite screws, and then remove the rear cover R.
Taptite, bind B Taptite, bind B
M4x12 M4x12
Rear cover R
Taptite,
bind B
M4x12
Hook
Taptite, bind B
M4x12
7) Disconnect the heater harness and thermistor harness.
8) Remove the bind B M4x12 Taptite screw and the shoulder screw, and then remove the
fixing unit.
Shoulder screw
Heater harness
Hook
Fig.5-19
Fixing unit
Taptite, bind B
M4x12
Fig.5-20
5-11
HL-5130/5140/5150D/5170DN SERVICE MANUAL
Rear cover L
Thermistor
harness