Brother HL-5130 Service Manual page 135

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
NOTE:
When re-assembling the thermistor to the FU frame upper, ensure the direction of the
thermistor is correct referring to the figure below;
FU frame upper
(8) Remove the two cup B M3x20 Taptite screws.
(9) Remove the FU frame upper from the FU frame lower.
Hook
FU frame lower
Pin
Hook
Taptite, cup B M3x20
Thermistor
Taptite, cup B M3x12
Fig. 4-58
Hook
Fig. 4-59
4-34
Thermistor
Pin
Taptite, cup B M3x20
FU frame upper
Hook