(23) Disconnect the connector for the eject sensor harness from the thermistor relay PCB
ASSY.
(24) Release the eject sensor harness from the three hooks.
(25) Remove the bind B M3x10 Taptite screw, and then remove the eject sensor PCB ASSY.
(26) Remove the bind B M3x10 Taptite screw, and then remove the thermistor relay PCB
ASSY.
Eject sensor harness
Thermistor relay PCB ASSY
Taptite, bind B M3x10
(27) Remove the paper eject actuator and eject actuator spring.
(hook)
Hooks
Fig. 4-68
Paper eject actuator
1
Fig. 4-69
4-39
HL-5130/5140/5150D/5150DN Service Manual
Hook
Taptite, bind B M3x10
Eject sensor PCB ASSY
FU frame lower
Eject actuator spring
3
2
FU frame lower