System Interface - Onkyo HT-R960 Service Manual

IC BLOCK DIAGRAMS AND TERMINAL DESCRIPTIONS-25
Q8001 : FLI30502 (LCD TV Controller with Worldwide Standard Sound Processor
and HDMI Receiver)-7/12
TERMINAL DESCRIPTION

System interface

Pin Name
GPIO11/PWM0
GPIO12/PWM1
GPIO13/PWM2/
656_VBI_VALID/
JTAG_RESET
GPIO14/PWM3/
SCART16_1
HSYNC1_VGA
VSYNC1_VGA
XOSD_CLK
XOSD_HS
XOSD_VS
XOSD_FLD
PD20/B4/GPIO45
PD21/B5/GPIO46
PD22/B6/GPIO47
PD23/B7/GPIO48
GPIO36/JTAG_TDO
GPIO36/JTAG_TDI
GPIO34
GPIO33
GPIO24
GPIO25
GPIO26
GPIO27
GPIO28
GPIO29
GPIO30
GPIO31
GPIO32
Pin # I/O Description
45 IO This Pin can be programmed to give out Pulse Width Modulated Output Pulses for eternal
use. This pin is also available as a General Purpose Input / Output Port.
IO
46 This Pin can be programmed to give out Pulse Width Modulated Output Pulses for eternal
use. This pin is also available as a General Purpose Input / Output Port.
49 IO This pin can programmed to give out Pulse Width Modulated Output Pulses for external use.
This pin is also available as a General Purpose Input / Output Port.
This is also used for JTAG reset.
50 IO
This pin can programmed to give out Pulse Width Modulated Output Pulses for external use.
It can be programmed to sense the Fast Blank Input signal from a SCART input source.
This pin is also available as a General Purpose Input / Output Port.
I
16 Horizontal Sync signal Input 1. Used when Analog RGB component signal carries separate
HSync signal. It has a programmable Schmitt trigger.
15 I Vertical Sync signal Input 1. Used when Analog RGB component signal carries separate
VSync signal. It has a programmable Schmitt trigger.
O
113 Clock Output meant for External OSD Controller.
O
114 Horizontal Sync Output meant for External OSD Controller.
O
115 Vertical Sync Output meant for External OSD Controller.
O
116 Field Signal Output meant for External OSD Controller.
99 IO These pins provide the Panel Data as shown in the Table 10, TTL Display Interface.
100 These are available as General Purpose Input / Output Pins when not used as Panel Data.
101
102
IO
154 This pin available as a General Purpose Input/Output port.
This is also used for JTAG TDO.
IO
155 This pin available as a General Purpose Input/Output port.
This is also used for JTAG TDI.
156 IO This pin available as a general purpose Input/Output port.
157 IO This pin available as a general purpose Input/Output port.
IO
160 This pin available as a general purpose Input/Output port.
IO
161 This pin available as a general purpose Input/Output port.
IO
164 This pin available as a general purpose Input/Output port.
IO
167 This pin available as a general purpose Input/Output port.
168 IO This pin available as a general purpose Input/Output port.
169 IO This pin available as a general purpose Input/Output port.
176 IO This pin available as a general purpose Input/Output port.
IO
177 This pin available as a general purpose Input/Output port.
IO
178 This pin available as a general purpose Input/Output port.
TX-SR606