Checking The Front Brake Linings; Changing The Front Brake Linings - KTM 450 SX-F EU Owner's Manual

12 BRAKE SYSTEM
12.6

Checking the front brake linings

Warning
Danger of accidents Reduced braking efficiency caused by worn brake linings.
–
Change worn brake linings immediately. (Your authorized KTM workshop will be glad to help.)
12.7

Changing the front brake linings

Warning
Danger of accident Brake system failure.
–
Maintenance work and repairs must be carried out professionally. (Your authorized KTM workshop will be glad to help.)
Warning
Skin irritation Brake fluid can cause skin irritation on contact.
–
Avoid contact with skin and eyes, and keep out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
If brake fluid comes into contact with the eyes, flush the eyes thoroughly with water and consult a physician immediately.
Main work
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
S00166-10
–
Add brake fluid to level
Guideline
Dimension
top edge of container)
Brake fluid DOT 4 / DOT 5.1 (
400379-10
–
Position cover
Info
Clean up overflowed or spilt brake fluid immediately with water.
S00166-10
–
Check the brake linings for minimum thickness
Minimum thickness
» If the minimum thickness is less than specified:
–
Change the front brake linings.
–
Check the brake linings for damage and cracking.
» If damage or cracking is visible:
–
Change the front brake linings.
B00350-10
x
.
1
with membrane .
2 3
.
A
(brake fluid level below
A
p. 97)
with membrane . Mount and tighten screws
2 3
A
x
x
5 mm (0.2 in)
.
1
.
A
≥ 1 mm (≥ 0.04 in)
( p. 60)
( p. 60)
60