Installing The Shock Absorber; Removing The Seat; Mounting The Seat; Guideline Remaining Screws, Chassis - KTM 450 SX-F EU Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.21

Installing the shock absorber

11.22

Removing the seat

11.23

Mounting the seat

x
Main work
–
Carefully position the shock absorber into the vehicle from above.
S00127-10
–
Position the frame protector.
Info
Pay attention to the holding lugs.
–
Mount and tighten screw
Guideline
Screw, frame protector
–
Attach the frame protector with the cable binder.
S00129-10
Finishing work
–
Install the manifold.
–
Install the main silencer. (
–
Remove the motorcycle from the lift stand. (
–
Remove screw
–
Lift up the seat at the rear, pull it back and then remove it from above.
101279-10
–
Hook in the front of the seat at the collar bushing of the fuel tank, lower it at the
rear and simultaneously it push forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten the screw of the seat fixing.
Guideline
Remaining screws, chassis
S00148-11
.
1
x
p. 48)
.
1
M5 3 Nm (2.2 lbf ft)
p. 35)
M6 10 Nm (7.4 lbf ft)
44