Changing Copy Speed And Quality; Enlarging Or Reducing The Image Copied - Brother MFC-250C User Manual

Chapter 10
Changing copy speed and
quality
You can choose from a range of quality
settings. The default setting is Normal.
To temporarily change the quality setting,
follow the instructions below:
Press Normal Normal is the
and then a or b
to choose
Fast
Quality
Best
a
Make sure you are in Copy mode
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Copy Options and a or b to
choose Quality.
Press OK.
e
Press a or b to choose Fast, Normal or
Best quality. Press OK.
f
Press Mono Start or Color Start.
52
10
recommended
mode for ordinary
print outs. This
produces good copy
quality with good
copy speed.
Fast copy speed
and lowest ink
consumption. Use to
save time printing
documents to be
proof-read, large
documents or many
copies.
Use best mode to
copy precise images
such as
photographs. This
provides the highest
resolution and the
slowest speed.
.
To change the default setting, follow the
instructions below:
a
Press Menu, 3, 1.
1.Quality
b
Press a or b to choose Fast, Normal or
Best quality. Press OK.
c
Press Stop/Exit.
Enlarging or reducing the
image copied
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
Press
Fit to Page
Custom(25-400%)
198% 10x15cmiA4
186% 10x15cmiLTR
142% A5iA4
and then a or b to
100%
choose
Enlarge/Reduce
97% LTRiA4
93% A4iLTR
83% LGLiA4
69% A4iA5
47% A4i10x15cm
10