Changing Copy Speed And Quality - Brother DCP-J140W Advanced User's Manual

Note
• Fit to Page does not work properly
when the document on the scanner glass
is skewed more than 3 degrees. Using the
document guidelines on the left and top,
place your document in the upper left
hand corner, with the document face down
on the scanner glass.
• Page Layout is not available with
Enlarge/Reduce.
Changing copy speed and
quality
You can choose the speed and quality. The
factory setting is Normal.
Press Normal Normal is the
Fast
Best
a
Load your document.
b
Enter the number of copies you want.
c
Press Copy Quality repeatedly to
choose Normal, Fast or Best.
3
recommended
mode for ordinary
printouts. This
produces good
copy quality with
good copy speed.
Fast copy speed
and lowest ink
consumption. Use
to save time
printing documents
to be proof-read,
large documents or
many copies.
Use Best mode to
copy precise
images such as
photographs. This
provides the
highest resolution
and the slowest
speed.
d
Press Mono Start or Colour Start.
To change the default setting, follow the
instructions below:
a
Press Menu.
b
Press a or b to choose 2.Copy.
Press OK.
c
Press a or b to choose 3.Quality.
Press OK.
d
Press a or b to choose Normal, Fast or
Best.
Press OK.
e
Press Stop/Exit.
Making copies
3
5