Using Receive Modes; Fax Only; Fax/Tel; Manual - Brother MFC-250C User Manual

Using receive modes

Some receive modes answer automatically
(Fax Only and Fax/Tel). You may want to
change the ring delay before using these
modes. (See Ring Delay on page 36.)

Fax only

Fax only mode will automatically answer
every call. If the call is a fax your machine will
receive it.

Fax/Tel

Fax/Tel mode helps you automatically
manage incoming calls, by recognising
whether they are fax or voice calls and
dealing with them in one of the following
ways:
Faxes will be automatically received.
Voice calls will start the F/T ring to tell you
to pick up the line. The F/T ring is a fast
double ring made by your machine.
(Also see F/T Ring Time (Fax/Tel mode only)
on page 36 and Ring Delay on page 36.)

Manual

To receive a fax in manual mode lift the
handset of an external telephone. When you
hear fax tones (short repeating beeps), press
Mono Start or Color Start. Press 2 when
you select the Fax Mode to Advanced
Mode. (See Setting the fax logic on page 23.)
You can also use the Fax Detect feature to
receive faxes by lifting a handset on the same
line as the machine.
(Also see Fax Detect on page 37.)

External TAD

6
External TAD mode lets an external
answering device manage your incoming
calls. Incoming calls will be dealt with in one
of the following ways:
Faxes will be automatically received.
Voice callers can record a message on the
6
external TAD.
(For more information see Connecting an
external TAD (telephone answering device)
on page 41.)
6
6
Receiving a Fax
6
35
6