Making Copies; Copy Settings; Stop Copying; Changing Copy Speed And Quality - Brother MFC-J825DW Advanced User's Manual

7

Making copies

Copy settings

You can change the copy settings temporarily
for multiple copies.
The machine returns to its default settings
after 1 minute, or if the Mode Timer returns
the machine to Fax mode. (See Mode Timer
uu page 2.)
To change a setting, press COPY or Copy,
and then press d or c to scroll through the
copy settings. When the setting you want is
displayed, press it and choose your option.
When you are finished choosing settings,
press Mono Start or Color Start.
Note
• You can save some of the settings that
you use most often by setting them as
default. These settings will stay until you
change them again. (See Setting your
favourites uu page 38.)
• The Ink Save Mode,
Thin Paper Copy, Book Copy and
Watermark Copy features are
supported by technology from Reallusion,
Inc.

Stop copying

To stop copying, press Stop/Exit.
Changing copy speed and
7
quality
You can choose from a range of speed and
quality. The factory setting is Normal.

Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.

Normal
Normal is the recommended mode for
ordinary print outs. This produces good
copy quality with good copy speed.

Best
Use Best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
a
Press
b
Load your document.
c
Enter the number of copies you want
using the dial pad.
d
Press d or c to display Quality.
e
Press Quality.
7
f
Press Fast, Normal or Best.
g
If you do not want to change additional
settings, press Mono Start or
Color Start.
(COPY).
7
7
7
29