Loading Envelopes And Post Cards - Brother MFC-250C User Manual

Chapter 2
i
While holding the paper tray in place,
pull out the paper support (1) until it
clicks and then unfold the paper support
flap (2).
Note
Do not use the paper support flap for
Legal paper.
Loading envelopes and post
cards
About envelopes
Use envelopes that weigh between 80 to
2
95 g/m .
Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first before printing many
envelopes.
10
DO NOT use any of the following types of
envelopes, as they will cause paper feed
problems:
• That are of a baggy construction.
• That are embossed (have raised writing
2
• That have clasps or staples.
• That are pre-printed on the inside.
1
Glue
Occasionally you may experience paper
feed problems caused by the thickness,
size and flap shape of the envelopes you
are using.
2
How to load envelopes and postcards
2
a
If envelopes or post cards are
'double-feeding', put one envelope or post
card in the paper tray at a time.
CAUTION
on them).
Double flap
2
Before loading, press the corners and
sides of envelopes or post cards to
make them as flat as possible.
Note
2
2