Sending A Fax; Entering Fax Mode; Faxing From The Adf (Mfc-290C Only); Faxing From The Scanner Glass - Brother MFC-250C User Manual

Hide thumbs Also See for MFC-250C:
Table of Contents

Advertisement

5

Sending a Fax

Entering Fax mode

To enter fax mode, press
the key will glow green.
Faxing from the ADF
(MFC-290C only)
a
Make sure you are in Fax mode
b
Place the document face down in the
ADF.
(See Using the ADF (MFC-290C only)
on page 17.)
c
Enter the fax number using the dial pad,
Speed Dial or Search.
d
Press Mono Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a mono fax while the memory
is full it will be sent in real time.

Faxing from the scanner glass

You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to Letter or A4 size.
You cannot send color faxes with multiple
pages.
Note
(MFC-290C only)
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
28
a
5
b
(Fax), and
c
d
5
.
e
f
5
Make sure you are in Fax mode
Load your document face down on the
scanner glass.
Enter the fax number using the dial pad,
Speed Dial or Search.
Press Mono Start or Color Start.
If you press Mono Start, the
machine starts scanning the first
page. Go to step e.
If you press Color Start, the
machine starts sending the
document.
Do one of the following:
To send a single page, press 2 to
choose No(Dial) (or press
Mono Start again).
The machine starts sending the
document.
To send more than one page,
press 1 to choose Yes and go to
step f.
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps e and f for each
additional page.)
5
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-290c

Table of Contents