Removing A 3.5 Inch Hard Drive From The Hard-Drive Cage; Installing A 3.5 Inch Hard Drive Into The Hard-Drive Cage - Dell DL1000 Owner's Manual

Removing A 3.5 Inch Hard Drive From The Hard-Drive Cage

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Remove the screws from the side of the 3.5 inch hard-drive cage.
2. Remove the hard drive from the hard-drive cage.
Figure 9. Removing and Installing a 3.5 Inch Hard Drive Into the Hard-Drive Cage
1. screws (4)
3. 3.5 inch hard drive

Installing A 3.5 Inch Hard Drive Into The Hard-Drive Cage

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Insert the hard drive into the hard-drive cage.
2. Align the screw holes on the hard drive with the screw holes on the hard-drive cage.
3. Install the screws to secure the hard drive to the hard-drive cage.
30
2. 3.5 inch hard-drive cage