Led Module; Removing The Led Module - Dell DL1000 Owner's Manual

LED Module

Removing The LED Module

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Turn off the system, including any attached peripherals.
2. Disconnect the power cable from the power source.
3. Remove the bezel, if applicable.
4. Insert a screw driver into the notch and pull out the LED label.
NOTE: Retain the removed LED label for future use.
5. Remove the screws securing the LED module to the chassis.
6. Remove the LED module from the chassis.
Figure 10. Removing and Installing the LED Module
1. notch
3. screws (2)
5. standoffs (2)
2. LED label
4. LED module
31