Installing The Optical Drive; Removing The Optical Drive - Dell Latitude System Media Base PR09S Setup Manual

Installing the Optical Drive

1 Save and close any open files or programs, and turn off the computer.
2 Insert the optical drive into the bay on the media base. (See "Right View" on page 8.)
3 Insert the securing screw that holds the optical drive in place.
4 Turn on the computer.
The operating system recognizes the new drive.

Removing the Optical Drive

1 Save and close any open files or programs, and shut down the computer.
2 Remove the securing screw that secures the optical drive and use your screwdriver to slide the drive out
of the module bay. See "Right View" on page 8.
16
Media Base Setup Guide