Dell DL1000 Owner's Manual page 71

Error Code Message Information
CPU0023
Message
Action
CPU0204
Message
Details
Action
CPU0700
Message
Details
Action
CPU0701
Message
Details
Action
CPU0702
Message
Details
CPU <number> is absent.
Verify processor installation. If present, re-seat the
processor.
CPU <number> <name> voltage is outside of range.
Voltages outside the allowable range may damage electrical
components or may cause the system to shutdown.
1. Turn off the system and remove input power for one
minute.
2. Ensure the processor is seated correctly.
3. Reapply input power and turn on the system.
4. If the issue persists, see
CPU <number> initialization error detected.
System BIOS was unable to initialize the processor.
1. Turn off the system and remove input power for one
minute.
2. Ensure the processor is seated correctly.
3. Reapply input power and turn on the system.
4. If the issue persists, see
CPU <number> protocol error detected.
System event log and operating system logs may indicate
that the exception is external to the processor.
1. Check system and operating system logs for exceptions.
If no exceptions are found, continue.
2. Turn off the system and remove input power for one
minute.
3. Ensure the processor is seated correctly.
4. Reapply input power and turn on the system.
5. If the issue persists, see
CPU bus parity error detected.
System event log and operating system logs may indicate
that the exception is external to the processor.
Getting Help.
Getting Help.
Getting Help.
71