Exmark lazer z Operator's Manual page 20

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
4.1.1 Blower Housing/Impeller:
4.1.2 Idler Bushings:
4.1.3 Bags:
4.1.4 Belts:
52" All
60" Lazer Z, XS, XP SN 599,999 and Lower
and All Lazer AS
72" All SN 599,999 and Lower
60" Triton
66" Triton
72" Triton
Inspect for wear or damage daily. Replace or repair worn parts as needed.
Note: When mowing in areas with sandy soil, use low lift blades on the
cutting deck and higher cutting heights to minimize wear on the blower
components.
Lubricate with 1-2 pumps of SAE No. 2 multi-purpose grease.
Inspect the bags for wear, tears, or damage.
POTENTIAL HAZARD
♦ Under normal use the bag will deteriorate
and wear. Objects could exit a worn bag
at high speeds.
WHAT CAN HAPPEN
♦ Thrown objects can cause serious injury
or kill you or bystanders.
HOW TO AVOID THE HAZARD
♦ Check bag frequently for tears and holes.
Replace worn bag.
a) All Units - Inspect the belt for damage or wear. Replace the belt with one of
the following.
Units:
b) For 52" units only - Belt replacement procedure
1) Remove the blower from the deck.
2) Remove the belt guide on the blower (See Figure 6)
3) Remove old belt.
4) Install the new belt onto the blower assembly as shown.
5) Reinstall the belt guide removed in step 2.
6) Reinstall the blower onto the deck.
www.mymowerparts.com
WARNING
Belt Part Number:
1-653438
103-0866
103-0867
109-1242
103-0867
109-1244
15