US Robotics Wireless 54Mbps ADSL Router User Manual page 73

Security is enabled on my Wireless 54Mbps DSL Router and my
wireless client cannot connect.
Possible Solution:
The 802.11g 54Mbps USB Adapter supports 64 and 128 bit encryp-
tion. Verify that all of the security features you have entered for the
profile of your 802.11g 54Mbps USB Adapter match the settings for
your Wireless 54Mbps DSL Router. For more information about set-
ting up connection profiles and security features, refer to the Navi-
gating the Wireless Configuration Utility section of the User Guide on
the U.S. Robotics Installation CD-ROM.
Possible Solution:
If you created a Profile Setting, unplug the 802.11g 54Mbps USB
Adapter and then plug it back in.
The U.S. Robotics Installation CD-ROM did not automatically
launch when I inserted it into my CD-ROM drive.
Possible Solution:
Some programs may keep the autolaunch feature of the Installation
CD-ROM from beginning. Close any open applications and reinsert
the Installation CD-ROM. If your CD-ROM still does not automatically
launch, click Windows Start, Run, and type D:\setup (if your CD-ROM
drive uses a different letter, type that letter in place of "D") and click
OK.
I accidentally clicked Cancel during the installation procedure of
the 802.11g 54Mbps USB Adapter.
Possible Solution:
Remove and reinsert the U.S. Robotics Installation CD-ROM into your
CD-ROM drive. Repeat the installation procedure of the software
before you install any hardware.
T
ROUBLESHOOTING
71