5. Confirm your settings
The Confirm page shows a summary of the configuration parameters.
Make sure the parameters for ADSL operation mode (WAN), Network
Layer Parameters (WAN), DHCP, and/or ISP parameters are correct
(see the following example).
Parameter
ADSL Operation Mode
(WAN)
ISP
Protocol
VPI/VCI
AAL5 Encapsulation
Network Layer
Parameters (WAN)
IP Address
Subnet Mask
Default Gateway
Description
The type of ISP you have selected.
Indicates the protocol used.
Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI).
Shows the packet encapsulation type. See the "WAN"
section later in this chapter for more information on
encapsulation.
WAN IP address.
WAN subnet mask.
WAN gateway.
S
W
ETUP
IZARD
19
Need help?
Do you have a question about the Wireless 54Mbps ADSL Router and is the answer not in the manual?
Questions and answers