Ring Tone Pattern Selection - Panasonic KX-TEA308 Features Manual

1.1.3.3

Ring Tone Pattern Selection

Description
A different ring tone pattern can be assigned to each incoming call type, such as intercom calls (
Extension Ring Tone Pattern [115]), calls from each doorphone (
and calls from each outside (CO) line (
Available ring tone patterns are as follows:
[Ring Tone Patterns]
Single
Double
Triple
S-Double
(Doorphone only)
Conditions
• The ring tone pattern for incoming calls (intercom calls and outside (CO) line calls) to a single line
telephone (SLT) can be fixed to "Single" or "Double" for each extension through system programming
( SLT Fixed Bell Pattern [629]). The length of the ring tone pattern depends on the preprogrammed
length of the bell-on signal (
signals of the SLT (
SLT may not ring properly, if the ring tone pattern of the SLT is set differently from that used by the
telephone company.
Feature Guide References
1.1.3.2 Outside (CO) Line Ringing Selection
4.2.1 Tones/Ring Tones
CO Line Ring Tone Pattern [423]).
1 s
SLT Ring Bell-on Time [143]), combined with the ratio between the bell
SLT Ring/Silence Ratio [142]). Depending on the type of SLT being used, the
1.1 Incoming Call Features
Doorphone Ring Tone Pattern [706]),
Feature Guide 19